-- *****************************************************************
-- ciscoWanTopologyCapabilities MIB
--
-- AGENT-CAPABILITIES mib for CISCO-WAN-TOPOLOGY-MIB in Cisco MGX8800
-- series and other Products.
--
-- Copyright 2001,2002,2003 by Cisco Systems,Inc.
--
-- Author: Shawn Hsu
-- *****************************************************************CISCO-WAN-TOPOLOGY-CAPABILITY DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITYFROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;ciscoWanTopologyCapability MODULE-IDENTITYLAST-UPDATED"200301150000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"DESCRIPTION"The Agent Capabilities for CISCO-WAN-TOPOLOGY-MIB.
This MIB is used in the MGX8850 product family, which
contains the MGX8850 and MGX8950 switches."REVISION"200301150000Z"DESCRIPTION"- Added ciscoWanTopologyV4R0000 capability for release
4.0.00."REVISION"200210310000Z"DESCRIPTION"- Replace the objects cwtLanIP and cwtAtmIP in
ciscoWanTopologyCapabilityV3R00 with objects
cwtPrimIPIfType, cwtPrimIPIfName, cwtPrimIPAddrType,
cwtPrimIP, cwtSecIPIfType, cwtSecIPIfName,
cwtSecIPAddrType, cwtSecIP.
- Added ciscoWanTopologyV3R0020 capability for release
3.0.20."REVISION"200110100000Z"
DESCRIPTION"Initial version of this MIB module."::={ ciscoAgentCapability 254}ciscoWanTopologyCapabilityV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 and BPX-SES Release 3.00"STATUScurrentDESCRIPTION"Persistent Topology MIB Capabilities."SUPPORTS CISCO-WAN-TOPOLOGY-MIB
INCLUDES{
cwtSystemMIBGroups,
cwtNodalMIBGroups
}VARIATION cwtGatewayNodeFlag
ACCESSread-onlyDESCRIPTION"write and create are not supported."
VARIATION cwtNodeId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtNodeName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPAddrType
ACCESSread-only
DESCRIPTION"write and create are not supported."VARIATION cwtPrimIP
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPAddrType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIP
ACCESSread-only
DESCRIPTION"write and create are not supported."VARIATION cwtSysObjId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtDBLastChange
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtNodeInfoTimeOutFlag
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtRowStatus
SYNTAXINTEGER{
active(1),
destroy(6)
}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5)."::={ ciscoWanTopologyCapability 1}ciscoWanTopologyCapabilityV3R0020 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 and BPX-SES Release 3.0.20"STATUScurrentDESCRIPTION"Persistent Topology MIB Capabilities."SUPPORTS CISCO-WAN-TOPOLOGY-MIB
INCLUDES{
cwtSystemMIBGroups,
cwtNodalMIBGroups,
cwtFeederMIBGroups
}
VARIATION cwtGatewayNodeFlag
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtNodeId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtNodeName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."
VARIATION cwtPrimIPAddrType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIP
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPAddrType
ACCESSread-onlyDESCRIPTION"write and create are not supported."
VARIATION cwtSecIP
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSysObjId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtDBLastChange
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtNodeInfoTimeOutFlag
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtRowStatus
SYNTAXINTEGER{
active(1),
destroy(6)}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5)."VARIATION cwtFeederRowStatus
SYNTAXINTEGER{
active(1)}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), destroy(6)."::={ ciscoWanTopologyCapability 2}ciscoWanTopologyCapabilityV4R0000 AGENT-CAPABILITIES
PRODUCT-RELEASE"MGX8850 and BPX-SES Release 4.0.00"STATUScurrentDESCRIPTION"Persistent Topology MIB Capabilities."SUPPORTS CISCO-WAN-TOPOLOGY-MIB
INCLUDES{
cwtSystemMIBGroups,
cwtNodalMIBGroups,
cwtFeederMIBGroups,
cwtLinkMIBGroups
}VARIATION cwtGatewayNodeFlag
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtNodeId
ACCESSread-only
DESCRIPTION"write and create are not supported."VARIATION cwtNodeName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIPAddrType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtPrimIP
ACCESSread-only
DESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPIfName
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIPAddrType
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSecIP
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtSysObjId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtDBLastChange
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtNodeInfoTimeOutFlag
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtRowStatus
SYNTAXINTEGER{
active(1),
destroy(6)}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5)."VARIATION cwtFeederRowStatus
SYNTAXINTEGER{
active(1)}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), destroy(6)."VARIATION cwtLinkLocalNodeId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkRemoteNodeId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkLocalIfIndex
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkRemoteIfIndex
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkLocalPhysicalId
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkRemotePhysicalId
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwtLinkInfoTimeOutFlag
ACCESSnot-implementedDESCRIPTION"Not supported."
VARIATION cwtLinkOutsideLink
ACCESSread-onlyDESCRIPTION"write and create are not supported."VARIATION cwtLinkRowStatus
SYNTAXINTEGER{
active(1)}DESCRIPTION"Does not support values notInService(2), notReady(3),
createAndGo(4), createAndWait(5), destroy(6)."::={ ciscoWanTopologyCapability 3}END